Welcome to episode 6 for the Willy's Jeep Build! Today we are building more body panels and getting into the chassis work and getting another engine. Tons of work on the build since the last video so be sure to let me know what you think! (sorry about the editing glitches. Audio off in some spots and way too fast in another)

If anyone is interested in helping out with this build, I have created a patreon account. Tons of big ticket items still needed for the build like a dry sump kit, turbo, wheels, driveshaft etc. Thousands of dollars that might take me a little bit to purchase. Any help would be very much appriciated!
https://www.patreon.com/limitliss

Hi, my name is DJ and welcome to Limitliss! I am obsessed with designing and fabricating, and my mind is always going. I've done full paint jobs, custom built tools, carbon fiber fabrication, full car builds. Once I get an idea in my head, I always see it through, no matter the challenges it presents!

I hope you all stick around and check out some of videos and please comment! I will do my best to answer any questions you have!

Check out the build series intro to hear all about this Willy's Jeep build project.
https://youtu.be/g4jqh2ILs-I

As always, please smash that like button, subscribe and ring the bell so you never miss an episode!

This Jeep build is going to be epic! Very low, custom chassis, pushrod suspension, sportbike engine in the front, Porsche transaxle in the rear. I hope to be scared by this beast! Nothing better than a bike engine car.

Ep. 1 -- ZX10r engine stand build
https://youtu.be/AtjxSxSXY1A

Ep. 2 -- ZX10r engine teardown
https://youtu.be/A2zD68XdlR4

Ep. 3 -- Budget chassis/fab table build
https://youtu.be/rvT4Gaf4WDk

Ep. 4 -- Cutting up the Willy's
https://youtu.be/Aj4BQsrVZEg

Ep. 5 -- Custom Willy's side panels built from scratch!
https://youtu.be/rW_8a_XYKvQ

Welcome to episode 5 for the Willy's Jeep Build! Today we are building cutom rear side panels out of 18g sheet metal and some mdf hammer forms. Please hit that like button if you enjoy the video!

Next video will be the start of the frame and the side panels just in front of the rear quarters.

Hi, my name is DJ and welcome to Limitliss! I am obsessed with designing and fabricating, and my mind is always going. I've done full paint jobs, custom built tools, carbon fiber fabrication, full car builds. Once I get an idea in my head, I always see it through, no matter the challenges it presents!

I hope you all stick around and check out some of videos and please comment! I will do my best to answer any questions you have!

Check out the build series intro to hear all about this Willy's Jeep build project.
https://youtu.be/g4jqh2ILs-I

As always, please smash that like button, subscribe and ring the bell so you never miss an episode!

This Jeep build is going to be epic! Very low, custom chassis, pushrod suspension, sportbike engine in the front, Porsche transaxle in the rear. I hope to be scared by this beast! Nothing better than a bike engine car.

Ep. 1 -- ZX10r engine stand build
https://youtu.be/g4jqh2ILs-I

Ep. 2 -- ZX10r engine teardown
https://youtu.be/A2zD68XdlR4

Ep. 3 -- Budget chassis/fab table build
https://youtu.be/rvT4Gaf4WDk

Ep. 4 -- Cutting up the Willy's
https://youtu.be/Aj4BQsrVZEg

Welcome to episode 04 for the Willy's Jeep Build! Today we are starting the teardown/cutting on the Willy's. This started out as just the floor removal, which quickly esceleded to me needing to build nearly all the body panels from scratch! I also located and picked up my new engine!

Hi, my name is DJ and welcome to Limitliss! I am obsessed with designing and fabricating, and my mind is always going. I've done full paint jobs, custom built tools, carbon fiber fabrication, full car builds. Once I get an idea in my head, I always see it through, no matter the challenges it presents!

I hope you all stick around and check out some of videos and please comment! I will do my best to answer any questions you have!

Check out the build series intro to hear all about this Willy's Jeep build project.
https://youtu.be/g4jqh2ILs-I

As always, please smash that like button, subscribe and ring the bell so you never miss an episode!

This Jeep build is going to be epic! Very low, custom chassis, pushrod suspension, sportbike engine in the front, Porsche transaxle in the rear. I hope to be scared by this beast! Nothing better than a bike engine car.

Ep. 1 -- ZX10r engine stand build
https://www.youtube.com/watch?v=AtjxSxSXY1A&t

Ep. 2 -- ZX10r engine teardown
https://www.youtube.com/watch?v=A2zD68XdlR4&t

Ep. 3 -- ZX10r chassis table build
https://youtu.be/rvT4Gaf4WDk

Welcome to episode 3 for the Willy's Jeep Build! Today we are building a chassis / fab table. I needed a budget friendly, somewhat temporary table to get this build off the ground and begin fabbing the chassis. This came in under $300 and is very flat! Should do the trick nicely. This huge table is 5 foot wide by 10 foot long!

Hi, my name is DJ and welcome to Limitliss! I am obsessed with designing and fabricating, and my mind is always going. I've done full paint jobs, custom built tools, carbon fiber fabrication, full car builds. Once I get an idea in my head, I always see it through, no matter the challenges it presents!

I hope you all stick around and check out some of videos and please drop a comment! I will do my best to answer any questions you have, and love reading your feedback!

Check out the build series intro to hear all about this Willy's Jeep build project.
https://youtu.be/g4jqh2ILs-I

As always, please smash that like button, subscribe and ring the bell so you never miss an episode!

This Jeep build is going to be epic! Very low, custom chassis, pushrod suspension, sportbike engine in the front, Porsche transaxle in the rear. I hope to be scared by this beast! Nothing better than a bike engine car.

Ep. 1 -- ZX10r engine stand build
https://www.youtube.com/watch?v=AtjxSxSXY1A&t

Ep. 2 -- ZX10r engine teardown
https://www.youtube.com/watch?v=A2zD68XdlR4&t

This was a server room I wired for a client.
Over 30,000 ft of cat6, 5,000 ft of speaker wire, and multiple other control wires.

Today on episode 2, we tear the head off the zx10r engine to see how bad the damage is! Wow, it was worse than expected.....

Also stick around to the end to hear about a possible engine update.

Check out the build series intro to hear all about this Willy's Jeep build project.
https://youtu.be/g4jqh2ILs-I

As always, please smash that like button, subscribe and ring the bell so you never miss an episode!

In This episode we build the bracket to hold a zx10r engine on the stand!

Please smash that like button and subscribe for more great content coming your way soon!

Stay tuned for the next episode where we pull apart the top end of this zx10r engine to see how bad the damage is from a dropped valve....

And don't forget to hit the "bell" to get notified everytime a new episode is uploaded to never miss a video again!

Rock Angel by Joakim Karud https://soundcloud.com/joakimkarud
Creative Commons — Attribution-ShareAlike 3.0 Unported— CC BY-SA 3.0
http://creativecommons.org/licenses/b...
Music promoted by Audio Library https://youtu.be/K8eRXvLL7Wo

Fresh Start by Joakim Karud https://soundcloud.com/joakimkarud
Creative Commons — Attribution-ShareAlike 3.0 Unported— CC BY-SA 3.0
http://creativecommons.org/licenses/b...
Music promoted by Audio Library https://youtu.be/XN-tBgJ5CVw

Mighty Love by Joakim Karud https://soundcloud.com/joakimkarud
Creative Commons — Attribution-ShareAlike 3.0 Unported— CC BY-SA 3.0
http://creativecommons.org/licenses/b...
Music promoted by Audio Library https://youtu.be/XMblPWkComQ

Roads by LiQWYD https://soundcloud.com/liqwyd
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
http://creativecommons.org/licenses/b...
Music promoted by Audio Library https://youtu.be/6XhY6AMmkLA

Roads by LiQWYD https://soundcloud.com/liqwyd
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
http://creativecommons.org/licenses/b...
Music promoted by Audio Library https://youtu.be/6XhY6AMmkLA

In this video I discuss the brand new build series starting now! Stay tuned for more content including the engine stand build, engine rebuild, chassis table and frame build, and much much more!

Please smash that like button if you enjoyed the new format and content!!
And check out my channel for more great videos.
https://www.youtube.com/user/limitliss