First published at 11:55 UTC on January 11th, 2022.
Welcome to part3 of the Citroen C3 WRC by Belkits at 1/24 scale.
In this video, I'll be demonstrating assembling shock absorbers, brakes and tie-rod in place of the chassis.
Applying carbon fiber decals to driver and co-driver seats, sump guard…
MORE
Welcome to part3 of the Citroen C3 WRC by Belkits at 1/24 scale.
In this video, I'll be demonstrating assembling shock absorbers, brakes and tie-rod in place of the chassis.
Applying carbon fiber decals to driver and co-driver seats, sump guard, interior doors, rear spoiler, and rear defuser.
showing how to make masks to replicate correct measurements to apply carbon fiber decals.
Airbrushing black to certain areas of the body.
Applying brake ducts.
Where I bought this model from: https://www.kit-car-model.com/
If you would like to purchase the decals, head straight to https://www.lbproductionhk.com/store/product/lb24050
Products I used:
1. Pop Sticks and Blu Tack
2. 200-1200grit Sand Paper from Hardware Store
3. Excel 55594 Sprue Cutters Blue
4. Revell 39604 Contacta
5. RS PRO Tweezers
6. Trojan Knife
7. 3mm Curve masking tape by Tamiya
8. 6mm, 10mm, 18mm Tamiya Masking Tape.
9. Loctite SupaGlue (Gel Type)
10. Micro Sol by Microscale Industries
11. Carbon Fiber decal by HobbyDesign (HD04-0157)
12. Artesania Spring Clamps 90mm
13. Tamiya Lacquer Thinner
14. Tamiya Polishing Compound (Finish)
Paints:
Tamiya XF4 Yellow Green.
SMS PL01 Premium Acrylic Lacquer Black 30ml
Tamiya LP5 Semi-Gloss Black
Tamiya Panel Line Colour Black
I purchased paints and products from:
https://hobbytechtoys.com.au/
https://www.mashobbies.com.au/
https://www.bnamodelworld.com.au/
#citroenc3wrc #citroenracing #citroenrally #citroenmotorsport #belkits
#sebogier
LESS