This is the complete video of them putting together all the raisedbed gardening boxes. We quickly put together the boxes in one morning before they left on a job. I can't wait to get vegetables growing in them.
The guys are building several ra…
This is the complete video of them putting together all the raisedbed gardening boxes. We quickly put together the boxes in one morning before they left on a job. I can't wait to get vegetables growing in them.
The guys are building several raised garden beds out of recycled metal. We left them at 36". The plan is to fill them about 3/4s of the way with local yard waste we can get free from the recycling center.
You might check with your area recycling center. If they don't have mulch you can pick up, you could try calling local tree service guys. Many times you can get mulch cheap from them. I'm also filling the bottom of the bins with trees and brush from cleaning up the park.
We wanted to do a video with all the garden beds being done, because with each one they learn new tips and tricks.
The material cost for each diy garden bed would be less than $100 if you had to buy all the material, but I bet if you looked around you'd be able to find someone with metal they want to get rid of.
⏱️⏱️Chapters⏱️⏱️
00:00 Follow along with a handyman
00:25 Using recycled metal to build corrugated metal raised garden beds
01:00 Plan to leave them 3 foot high, but you could cut the metal in half
02:05 Using rake and corner for the corner of each box
03:00 Material needed for each box
04:30 We are not using any wood it the boxes because the wood will rot
09:00 Phil is doing the putting together now.
14:54 First Garden box is complete
15:17 Talking about rabbit fertilizer
15:42 Putting together the second garden bed
16:00 They are using a 2by to hold the metal together while screwing
18:00 And the next one, this one they have to patch the holes
20:20 They are screwing each corner piece right into the ribs
21:20 Great way to use leftover material, or even for you to pick up cheap or free material and end up with damn near free garden beds.
22:45 Sheet is a perfect patch for the holes in the metal
24:00 Best way to put them together is put one long side and the two wide sides, then add the other long side.
25:00 You can use the 2by to apply pressure while putting the screws in, also keeps you from screwing your partner.
27:06 Use the J-channel to secure the middle panel so the box will be more stable. Also, gives you 2 growing boxes.
30:00 See even pro-builders have problems
34:24 Be an American not an American't
🙏 Subscribe, 👍, it helps a lot!!
➤❓/ 💬: [email protected]
➤ Follow https://straightarrowrepair.com/pipf
➤➤I get a little for the channel-no charge for you if you use the links:
➤➤Shop Amazon https://amzn.to/3CxD1T4
➤➤Tool lists & recommended products🧰 https://straightarrowrepair.com/0lvf
➤➤Services We use
➤➤MORNINGFA·ME https://morningfa.me/invite/StraightArrowRepair
➤➤A2 Hosting http://www.a2hosting.com/refer/140244
➤➤Tubebuddy https://www.tubebuddy.com/StraightArrowRepair
➤➤Apsumo http://fbuy.me/v/philbridges
➤➤VidIQ: https://vidiq.com/straightarrowrepair
#anyonecanmake #elevatedgarden #gardenbed #raisedbeds #gardenbeds #gardening
